33 Ford

Factory Fove 33 Hot Rod On a TearFactory Five Racing

33 Hot Rod Page

.

The Factory Five Racing 33 Hot Rod looks for all the world like a traditional 1950’s Hot rod, but the similarities are all visual – and there’s nothing wrong with that!

.

In point of fact the 33 Hot Rod uses all of the latest technology developed on the race track and the end result is a race car chassis in a hot rod body.

.

As a result of this marriage of old looks and new underpinnings that Factory Five racing 33 Hot rod is actually quicked on the auto cross circuit that the MK4 Cobra which in itself is no slouch!

.

.If you interest leans more towards a traditional hot rod than say a Cobra, then you have arrived at precisely the right place!

.

The Factory Five  33 Hot Rod kit is the perfect place to begin the processs of building the car of your dreams. The kit includes everything you need to build the car except the driveline, wheels, tires, battery and paint. And when you get it done you have a car that like all of the Factory Five racing cars an every aspect of its intended use far exceeds your highest expectations.

.

Complete list of Included parts in the 33 base kit follows. Note that Items listed in Red Text are parts that Factory Five is required by the Cdn Federal DOT to remove from the kit in order to allow them to be shipped into Canada. All of the removed parts are readily available from alternate sources and as a resuly of having to delete all of these parts Factory Five has reduced the Kit price for Canadian customers down to $15,490.00 US.

.

The Base kit is $19990.00 US, but there are many options that can be added to these cars and the best way to gain a complete understanding of what your “Ideal Hot Rod” would cost to build is to sign up for the WCC mail list using the blue panel on the right. When you do so you gain access to subscriber only on-line interactive work sheets that allow you to option your Hot Rod as you  envision it and as you do so the spread sheet will price your build for you.

.

Experience tells us that IF you stick to the plan you embodied in the spread sheet, and that’s hard to do, you will build the car for within $1500 of what the sheet shows. (assuming of course that your estimates for Paint etc are in line with costs in your area)

Parts List for the 33 Hot Rod base Kit Follows:

    • Frame: Complete jig-welded tube frame.  Includes all mounts
      ready to accept small block Ford and 4.6L engines.

      • Includes driver and passenger roll bar
      • Accommodates either 3 or 4 link suspension
    • Body:  Hand laid 3/16” laminate composite body and panels made
      with vinylester resin. 

      • Driver and Passenger doors with molded door liners
      • Hood with hood liner
      • Trunk with molded trunk liner
      • Includes secondary body fasteners assembly.
        • Adhesive backed and foam weatherstrip
        • Door edge trim and fasteners
        • Trunk push on rubber bulb seal
        • Rubber hood bumpers
      • Includes multi-adjustable door hinges with bronze bushings
        w/fasteners
      • Includes hidden trunk hinge kit, hinge support plates and
        fasteners
      • Includes hood hinge kit with supports and fasteners.
    • Chassis Aluminum Panels: Includes 26 CNC cut, pre-formed
      6061-T6 aluminum panels for cockpit, trunk, and engine bay.

      • 1200 pre-packaged rivets1/8” short & long, 3/16” short &
        long
      • Complete cockpit aluminum
      • 1/8″ firewall between engine and passenger compartment
    • Complete Front Suspension:  Unequal length a-arm control arms
      with in-board coil-over shock suspension.  Comes complete with all parts and
      fasteners. 

      • Koni brand high performance mono-tube, rod-end shock absorbers
      • Coil-over kit for Koni dampers including spring hat, threaded seat
        and black powdercoated performance springs
      • Adjustable lower control arms with ball joints and fasteners
      • Upper tubular control arms with ball joints and fasteners
      • Grade-8 mounting hardware.
    • Factory Five Rear Suspension: 4-Link Suspension
      • Koni brand high performance mono-tube, rod-end shock absorbers
      • Coil-over kit for Koni dampers including spring hat, threaded seat
        and black powdercoated performance springs
      • Factory Five tubular upper and rear lower control arms,
        w/polyurethane bushings and fasteners
    • Complete Front Brake Kit:
      • Custom Spindles w/fasteners
      • Front hubs, fasteners and dust covers
      • Front Brakes, Ford GT 11” front rotors w/twin piston calipers, brake
        pads and fasteners
      • Master cylinder (listed in pedal box assembly), stainless braided
        brake line, front and rear w/mount clips, banjo bolts and brake line mounting
        fasteners
      • Pre-flared 3/16” brake line and brake line T-adapter
      • OEM Ford Mustang emergency brake handle, fasteners and cable
    • Complete Steering System:  Complete steering system using rear
      steer manual rack from tie rod ends and fasteners to steering wheel and
      badges.
  • Manual steering rack w/inner and outer tie rod ends and
    fasteners
  • Polyurethane steering rack bushing and fasteners
  • Nickel plated lower steering shaft
  • 14” banjo steering wheel w/boss and ceramic F5R center section and
    fasteners
  • Steering system, including flange bearings and fasteners
  • Custom Ididit steering column with frame mounts

 

  • Complete Fuel System/Parts:  This assembly provides everything
    from the gas cap to the lines, and is designed to work with carburetors or fuel
    injection systems. External fuel pump required.

    • Fuel tank w/mounting hardware, vent, gaskets, pick-up and fuel level
      sending unit
    • Fuel filler neck and fasteners
    • Pre-flared fuel lines (1/4” and 5/16”) w/unions, barbs, hose clamps
      and high press flex lines and fasteners
    • Aircraft style brushed aluminum fuel cap with gaskets, ground strap,
      fuel hose to tank w/fasteners.
    • 3/8” line fuel filter, connectors and hose clamps

 

 

  • Complete Cooling System/Parts: Electric cooling fan and
    mounting hardware, radiator hoses, and all necessary fasteners.

    • Electric cooling fan and mounting kit w/connectors
    • Aluminum radiator w/cap and in-line filler neck
    • Built in transmission cooler in radiator
    • Stainless Steel radiator hose kit incl. adapter kit, fasteners and
      hose
    • Overflow tank w/cap, hoses, hose clamps and mounting hardware
    • 185 degree thermostat switch and wiring

 

  • Engine Accessories:  The ’33 Hot Rod kit is configured to
    accommodate the engine of your choice.

    • Engine/Transmission mounts (select 302/351 or 4.6L), with
      fasteners
    • Exhaust, with gaskets and fasteners.

 

  • Driveshaft:  Select from one of three available driveshafts
    w/fasteners to match the engine/trans of your choice.  Select one of the
    following…

    • 28 spline driveshaft for T-5, AOD,  or Tremec 3550’s
    • 31 spline driveshaft for Tremec TKO 500 or 600’s
    • 31 spline driveshaft for 4.6L engines w/T-45’s or 3650’s

 

  • Gauges and Dash and Electrical Assembly: Complete assembly
    comes dash buttons, toggles and indicator lights, switches, and horn. 

    • Custom fit chassis wiring harness
    • Ignition switch and F5R key, headlight switch, Hi-Low beam switch,
      starter solenoid and horn button.
    • Dash indicators: Green, Blue dash lights
    • Wiring harness mounting kit and hardware including Fuse panel
      mount
    • Insulated line clip hardware and fasteners
    • Cable ties
    • Battery ground strap
    • Speedometer sending unit, pigtail, fasteners and 3.55 speedometer
      gear
    • A complete set of 6 Autometer Platinum electronic gauges,
      w/connectors, terminals and installation kit.  Includes the following gauges:

      • Speedometer
      • Tachometer
      • Oil Pressure Gauge
      • Water Temperature Gauge
      • Fuel Level Gauge
      • Voltmeter

 

  • Complete Interior Accessories:  The ’33 Hot Rod kit comes with all the interior
    accessories you need and want.  Bucket seats, door latches, rear view mirrors,
    and more complement the dash and gauges assembly for a full interior.  Check out
    this full list of standard parts and assemblies.

 

    • Bucket metal framed seats, black vinyl w/fasteners
    • 5-point Simpson Brand harnesses.  3” wide driver and passenger, frame
      mounted  w/fasteners
    • Complete cockpit carpet set, black all-weather
    • Emergency brake boot, black vinyl
    • Interior rear view mirror w/fasteners
    • 6-gauge electronic Autometer Platinum gauges (see description above
      in gauge assembly)
    • Interior door latches and fasteners
    • Shifter boot and fasteners
    • Banjo style steering wheel (listed in steering assembly), w/polished
      aluminum boss and center badge.
  • Exterior Accessories and Lighting:  Along with the goodies on
    the inside of the car, the ’33 Hot Rod kit is loaded with the right exterior
    parts and trim on the outside.

    • Aluminum windscreen, tinted with fasteners.  DOT safety glass
      compliant
    • License plate light and bracket with fasteners        
    • Ceramic F5R badging nose and tail
    • Headlamp assemblies, including chrome buckets, halogen headlamps,
      with integral turn signal, and fasteners (DOT approved).
    • Red rear LED tail-lights
    • All lighting is DOT approved.
  • Complete Pedal Box and Components:  The ’33 Hot Rod kit
    utilizes the proven Wilwood brand pedal box w/fasteners and all the required
    ancillary parts. 

    • Wilwood pedal box and mounting hardware
    • Master Cylinders
    • Accelerator pedal, accelerator cable, return spring and ball stud
      retainer, w/fasteners
    • Brake line adapters and T-fittings

 

  • Assembly Manual:  Bound assembly manual that is full of
    pictures and diagrams.

 

  • Fasteners:  Over 1600 top quality zinc plated, chrome and
    stainless steel USS and SAE fasteners, numbered and packed individually by
    assembly.

Contact Info

By Phone 250 777-3031

By E-Mail Cdncobraguy@gmail.com