Western Canada Cobras

If you live in an area where good donor Mustangs are about as common as hens teeth or you simply want to build a car from all new parts it is possible to do this. We have a Canadian source that can supply virtually everything required to build you Cobra except the engine, transmission, wheels and tires fuel tank  and relates components and a battery.

While definitely not the cheapest way to go it is an option that in certain circumstances may make sense.  Parts included in the package include

Call for current pricing. – We can also provide select parts of this list as well.

Base Kit Completion  Pack – replaces all Items deleted by FFR per Cdn. DOT Requirements          Pack includes
Coupe/Roadster Completion Kit Including:
UPPER BALL JOINT, (FRONT UPPER CONTROL ARM) EA 2.00
EXTENSION TUBING, RUBBER 2″ ID, FUEL RESISTANT, (FUEL FILL) FT 1.00
BOLT, ALLEN HEAD, 3/8″-16 x 2″, (FUEL TANK MOUNT) EA 4.00
LOCK NUT, NYLON, 3/8″-16, (FUEL TANK MOUNT) EA 4.00
WASHER, 3/8″ SAE, (FUEL TANK MOUNT) EA 2.00
SHOCK SPACER, 0.750″ OD x 1.0935″(REAR SHOCK MOUNTING) EA 6.00
BOLT, 1/2″-13 x 4″, (REAR SHOCK MOUNTING) EA 2.00
LOCKNUT, NYLON, 1/2″-13, (REAR SHOCK MOUNTING) EA 2.00
BOLT, 1/2″-20 x 3″, (REAR SHOCK MOUNTING) EA 2.00
LOCKNUT, MECHANICAL , 1/2″-20, (REAR SHOCK MOUNTING) EA 2.00
UNION, ¼” EA 1.00
BARB, ¼” EA 2.00
UNION, 5/16″ EA 1.00
BARB, 5/16″ EA 2.00
HOSE CLAMP, 1/4″ FUEL LINE EA 5.00
HOSE CLAMP, 5/16″ FUEL LINE EA 5.00
 1/4″ ID, HIGH PRESSURE FUEL HOSE FT 3.00
 5/16″ ID, HIGH PRESSURE FUEL HOSE FT 3.00
SCREW, #14 x 1/2″, (FUEL FILTER MOUNTING) EA 3.00
UNION, 3/16″ EA 2.00
BRAKE LINE “T” ADAPTER, 2 FEMALE, 1 MALE EA 1.00
10MM BRAKE LINE METRIC ADAPTER EA 1.00
¼” BRAKE LINE ADAPTER EA 1.00
BRAKE LINE, 3/16″ O.D. x 60″ EA 4.00
BRAKE LINE, 3/16″ O.D. x 20″ EA 1.00
BRAKE LINE, 3/16″ O.D. x 8″ EA 1.00
FUEL LINE, ¼” O.D. x 60″ EA 2.00
FUEL LINE, 5/16″ O.D .x 60″ EA 2.00
ROADSTER/COUPE KONI FRONT COIL OVER KIT
DAMPER, (KONI 30-1720) EA 2.00
2.5″ KONI SPRING HAT  EA 2.00
2.5″ KONI THREADED SPRING SEAT EA 2.00
2.5″ KONI DAMPER THREADED SLEEVE EA 2.00
SPRING,  2.5″ ID x 8″ LENGTH, 500#, BLACK, (FRONT DAMPER) EA 2.00

1987-1998 Standard Width Front Lower Control Arms With Ball Joints

8.8″ Traction-Lok Rear Axle with your choice of gearing

Rear Lower Control Arms – Assumes Use of 4 Link Rear Suspension and Mustang Shocks

Rear Upper Control Arms – Assumes Use of 4 Link Rear Suspension and Mustang Shocks

Roadster Cooling System Including:
- Aluminum Radiator
- Radiator Hose Filler Assembly
- Lower Fan Mount Bracket
- 185 Degree Thermostat Switch
- 16# Radiator Cap
-  Overflow Tank Kit

Manual Steering Rack 15:1 Ratio Includes:
Tie Rod Ends
Polyurethane Rack Mounting Bushings.
Manual Steering Rack Adapter

Complete 4 Wheel Brake Kit Including:
S/N 95 style spindles (black zinc coated) with hubs, hub nuts and nut dust covers.
-  Two (2) Aluminum twin piston PBR front calipers with Wagner Semi-metallic
    brake pads.
-  Two (2) Cast iron single piston rear calipers with Wagner ceramic brake pads.
-  Two (2) 11” vented front brake rotors.
-  Two (2) 10.5” solid rear brake rotors.
-  One (1) 15/16” diameter brake master cylinder with plastic reservoir.
-  Fasteners including Caliper mounting bolts, IFS bracket bolts, brake line adapters
    and bolts
-  Two (2) five lug 87-93 width 28 spline hardened steel axles.
-  Rear brake caliper axle mount brackets.
-  Front and rear Stainless steel braided brake lines.
-  Wilwood adjustable proportioning valve.
-  Emergency brake cables.
E-Brake Handle

#14701 Factory Five Racing Electric Gauge Set
Wilwood Brake and Clutch Pedal Set with Dual Brake Master Cylinders

Gas Pedal Assembly

FFR Chassis Wiring Harness – Assumes use of Carburated Engine Must Order EFI Engine Harness of using EFI Engine.

FFR Ignition Switch

Drive Shaft