Western Canada Cobras

Hello guys,

Glad to be on the forum.   I'm sure we will be sharing lots concerning the GTM.

Just a bit about myself, I live in Northern Ontario in the city of North Bay. I have just recently purchased the FFR GTM Supercar and begun the build. I have taken some photos during the build that I would like to share with you all, but first a couple of notes that should be taken under consideration.

1. The photos did not start until some of the components have been stored. My partner, being my 11 year old son, told me I should be taking pictures.

2. At the time, the pictures where basically for myself and not for sharing. You have to understand the garage is a multi functioning garage (a little messy or a lot messy).

3. Not least, I have been approach that it would be a good idea to share my experiences concerning the GTM build.

After all that being said, lets start with some pictures on the outside storage of the body shell and miscellaneous components that would only be required near the end of the build.

The main floor of the crate was built from 4×4 timber and 3/4 inch plywood. Inside the crate I built a body buck from 1/2 inch plywood to support the body shell. The walls and roof are standard 2×4 studs braced and added 1/2 inch plywood on the roof. After all the items have been packaged in the crate, I tarped it.

I hope you can view the pictures. If not, please let me know.

That would be it for now.    More pictures of the actual build to come.

Radar