8 Stack Induction Systems

We are an Authorized Canadian Dealer for Inglese Induction Systems.

Inglese is the premier supplier of 8 Stack Induction Systems and supply both Weber and IDE carburator versions as well as  EFI systems that provide classic looks with all of the advantages of a modern EFI system.

If you want the ultimate in “Wow Factor” that also provides optimized engine breathing  this is the option you want to consider.

All systems are built custom for your engines specifications as a result you will need to provide as much information as you can when ordering in order that your kit can be configured as close as possible in order to provide as close as possible to a plug in installation.

Additionally there are numerous options available once a basic set is configured. These options include such things as powder coated or painted carbs and manifolds, Brushed Aluminum or Chrome Velocity Stacks,  Various filter configurations Etc. Etc.

 

All Inglese ™ systems are fully engineered and custom tailored around each customer’s individual application, ensuring the jetting, linkage and setup are correct from the factory. Each system ships complete with intake manifold gaskets, chrome mounting bolts, a Unisyn tuning meter, Inglese ™ t-shirt (give size when placing induction system order) and an Inglese™ tuning manual for IDF systems.

Following this information you will find links that will open up configuration work sheets. When you have completed the sheet, use the buttons on the bottom of the page to print a copy and then send your sheet to us by clicking “Submit”.  Do not be overly concerned if you are unsure on certain details. Choose what you think is correct and we will work with Englese technical staff to ensure you get the correct system for your engine.

When ordering a system there only a few basic steps required as follows.

FOR EFI KITS (Carb based Systems follow)

To make ordering your Inglese ™ EFI induction system easier, we’ve made a complete checklist of parts that you will need. Simply make your way down the list and pick the part numbers you need from the check list below. Send us an E-mail and we will send you an Engine details page to fill out Using that information we will confirm your configuration and make suggested changes consistent with providing you with a system optimized to your engine.

  • Choose your “base kit” system determined by what type of engine you have (will include manifold & throttle body assembly, complete FAST ™ EZ-EFI® & XFI™ kit and Dual-Sync Distributors)
  • .
  • Choose what size injectors you need based on your targeted horsepower (sold separately from the “base kit”)
  • .
  • Choose what size and finish stacks you want (sold separately from the “base kit”)
  • .
  • Choose your fuel pump kit based on your targeted horsepower – you need 60 psi (sold separately from the “base kit”)

Click HERE to Configure an EFI System.

.

.

For Carburetor Based Systems

  • Choose your “base kit” system determined by what type of engine you have (will include manifold & carburetors, linkage and fuel system with pressure regulator and fuel pressure gauge )
  • Choose what size and finish stacks you want (sold separately from the “base kit”)
  • Choose your fuel pump kit based on your targeted horsepower – you need a 3-5 PSI Pump (sold separately from the “base kit”)

Click HERE to Configure a  Carb. Based System.

Contact Info

By Phone 250 777-3031

By E-Mail Cdncobraguy@gmail.com