MK4 Complete kit

FACTORY FIVE RACING MK4 REPLICA

No Donor Required Build Page

So you’ve settled on a MK4 Replica from Factory Five, and after weeks of looking have come up empty on finding a good usable Donor car at a reasonable price – what to do?

Consider going the no doner required build route. Going this route eliminates having to locate all but the most basic parts, specifically the complete drive line, wheels, tires, battery and paint. Everything else you will need is included in the kit.

The Base Price of the MK4 Complete kit is $19,990.00 US. There are many options that can be added to these cars and the best way to gain a complete understanding of what your “Ideal Cobra” would cost to build is to sign up for the WCC mail list using the blue panel on the right. When you do so you gain access to subscriber only in-line interactive work sheets that allow you to option your Cobra as you envision it and as you do so the spread sheet will price your build for you.

Experience tells us that IF you stick to the plan you embodied in the spread sheet, and that’s hard to do, you will build the car for within $1500 of what the sheet shows. (assuming of course that your estimates for Paint etc are in line with costs in your area)

Complete list of Included parts in the Base kit follows. Note that Items listed in Red Text are parts that Factory Five is required by the Cdn Federal DOT to remove from the kit in order to allow them to be shipped into Canada. All of the removed parts are readily available from alternate sources.

- Frame: Complete jig-welded original style 4” round tube
  frame. Includes all mounts ready to accept small block Ford and 1987-2004
  Mustang running gear. Kit can be ordered to accept a wide variety of
  engines/suspensions.
  - Comes powdercoated in gloss black
  - Includes three point roll bar powdercoated to match
  - Includes mounts to accept passenger side roll bar.
- Body: Hand laid 3/16” laminate composite body and panels made
  with vinylester resin.
  - Driver and Passenger doors with new molded door liners
  - Hood with new molded hood liner, and centered hood scoop
  - Trunk with new molded trunk liner and improved mount face for lic
    plate light.
  - Includes secondary body fasteners assembly.
    - Adhesive backed and foam weatherstrip
    - C-channel door edge trim and fasteners
    - Plastic end caps and body u-nut fasteners
    - Trunk and engine bay seal, push on rubber bulb seal
    - Rubber hood and trunk bumpers
  - Includes multi-adjustable door hinges with bronze bushings
    w/fasteners
  - Includes vintage trunk hinge kit, hinge support plates and
    fasteners
  - Includes hood hinge kit with hydraulic piston supports and fasteners
    Includes original design quick-jack competition bumpers w/stainless steel
    sleeves and fasteners.
- Chassis Aluminum Panels: Includes over 40 CNC cut, pre-formed
  6061-T6 aluminum panels for cockpit, trunk, and engine bay.
  - 1200 pre-packaged rivets1/8” short & long, 3/16” short &
    long
  - Complete Mk4 cockpit aluminum with optional block-off plates and
    patch covers
  - Engine bay aluminum assembly with aluminum nose sections and splash
    guards
  - Aluminum trunk liner has been replaced by molded trunk liner
- Complete Front Suspension: Unequal length a-arm control arms
  with coil-over shock suspension. Comes complete with all parts and fasteners.
  - Koni brand high performance mono-tube, rod-end shock absorbers
  - Coil-over kit for Koni dampers including spring hat, threaded seat
    and 500lb. black powdercoated performance springs
  - Adjustable upper control arms with ball joints and fasteners
  - Lower tubular control arms with ball joints and fasteners
  - Grade-8 mounting hardware.
- Complete Rear Suspension: High-end 3-link deluxe rear
  suspension with fasteners and hardware required to install.
  - FFR Deluxe 3-Link suspension kit w/rear-end brackets, upper link kit,
    and fasteners, including pan-hard bar kit w/rod-ends and gr8 fasteners.
  - Koni brand high performance mono-tube, rod-end shock absorbers
  - Coil-over kit for Koni dampers including spring hat, threaded seat
    and 350lb. black powdercoated performance springs
  - Factory Five tubular rear lower control arms, w/polyurethane bushings
    and fasteners
- Complete Front Brake Kit:
  - S/N 95 style spindles and spindle adapter bracket w/fasteners
  - Front hubs, fasteners and dust covers
  - Front Brakes, Ford GT 11” front rotors w/twin piston calipers, brake
    pads and fasteners
  - Master cylinder (listed in pedal box assembly), front stainless
    braided brake line w/mount clips, banjo bolts and brake line mounting
    fasteners
  - Pre-flared 3/16” brake line and brake line T-adapter
  - OEM Ford Mustang emergency brake handle, fasteners and cable
- Complete Steering System: Complete steering system using 15:1
  manual rack from tie rod ends and fasteners to vintage steering wheel and
  badges. Collapsible design.
  - 15:1 Manual steering rack w/inner and outer tie rod ends and
    fasteners
  - Polyurethane steering rack bushings and fasteners
  - Steering rack shaft adapter 9/16-26 spline
  - Nickel plated lower steering shaft (fully welded u-joints)
  - Collapsible upper steering shaft, w/friction washers
  - 14” Vintage wood and aluminum steering wheel w/boss and ceramic F5R
    center section and fasteners
  - Steering bearings and hardware, including flange bearing, pillow
    block bearing and fasteners
- Complete Fuel System/Parts: Based on OEM style fuel tank and
  system, this assembly provides everything from the gas cap to the lines, and is
  designed to work with carburetors or fuel injection systems. External fuel pump
  required.
  - OEM style fuel tank w/mounting straps and hardware, vents, gaskets,
    pick-up and fuel level sending unit
  - Fuel lines, connectors, filler neck and fasteners
  - Pre-flared fuel lines (1/4” and 5/16”) w/unions, barbs, hose clamps
    and high press flex lines and fasteners
  - Aston LeMans style polished aluminum fuel cap with integral pressure
    cap, gaskets, ground strap, fuel hose to tank w/fasteners.
  - 3/8” line fuel filter, connectors and hose clamps
- Complete Cooling System/Parts: Electric cooling fan and
  mounting hardware, extensions for radiator hoses, and all necessary fasteners.
  - Electric cooling fan and mounting kit w/connectors
  - Aluminum radiator w/cap and in-line filler neck
  - Radiator mount kit and fasteners
  - Stainless Steel radiator hose kit incl. adapter kit, fasteners and
    hose
  - Overflow tank w/cap, hoses, hose clamps and mounting hardware
  - 185 degree thermostat switch and wiring
- Engine Accessories/Side Exhaust/Mounts: The Mk4 Complete kit
  is configured to accommodate the engine of your choice. Select from full
  tubular 4-into-4-into 1 headers and side exhaust, engine and transmission
  mounts.
  - Engine/Transmission mounts (select 302/351 or 4.6L, or 390/427/428,
    or 429/460), with fasteners
  - Exhaust, with gaskets and fasteners. Select from
    - 87-95 straight pipes
    - 96-04 straight pipes
    - 302 Headers, ceramic coated
    - 351 Headers, ceramic coated
    - 390/427/428 Headers, ceramic coated
    - 429/460 Headers, ceramic coated
    - 87-95 Catalytic converters w/air hose, check valve, T-hose
      fitting
    - 96-04 Catalytic converters
    - 4.6L 2-Valve Headers, ceramic coated
    - 4.6L 4-Valve Headers, ceramic coated
  - Side Exhaust, bare steel w/rubber hanger brackets, gaskets and
    fasteners
- Driveshaft: Select from one of three available driveshafts
  w/fasteners to match the engine/trans of your choice. Select one of the
  following…
  - 28 spline 10.375” driveshaft for T-5 or Tremec 3550’s
  - 31 spline 10.375” driveshaft for Tremec TKO 500 or 600’s
  - 31 spline 12.875” driveshaft for 4.6L engines w/T-45’s or
    3650’s
- Gauges and Dash and Electrical Assembly: End those wiring
  harness woes, integrated harness and electronic gauges are just the start of
  this massive assembly. Choose either vintage/replica or modern/ performance
  gauges to complement an authentic original street style dash. Complete assembly
  comes with covered aluminum dash, dash buttons, toggles and indicator lights,
  switches, and horn.
  - Mk4 pre-cut original style aluminum dashboard w/fasteners
  - Padded dash cover, black vinyl
  - Custom fit chassis wiring harness
  - Ignition switch and F5R key, headlight switch, 3-position turn signal
    switch, starter solenoid and horn.
  - Dash indicators, Red, Green, Blue dash lights
  - Wiring harness mounting kit and hardware incl. Fuse panel
    mount
  - Insulated line clip hardware and fasteners
  - Cable ties, wire loom and flex grommeting
  - On/Off switch, horn button, flasher and all connectors
  - Battery ground strap
  - Battery Box and Relocation Kit: Trunk mounted battery box, cables
    and hold-downs with fasteners.
  - Speedometer sending unit, pigtail, fasteners and 3.55 gear
  - Choose a complete set of 7 Autometer Ultra-Light electronic gauges,
    w/connectors, terminals and installation kit. Includes the following gauges:
    - Speedometer
    - Tachometer
    - Oil Pressure Gauge
    - Water Temperature Gauge
    - Fuel Level Gauge
    - Voltmeter
    - Oil Temperature Gauge
OR Select
- Complete Interior Accessories: The Mk4 Complete kit comes with all the interior
  accessories you need and want. Authentic original style seats, door latches,
  toggles, rear view mirror, and more complement the dash and gauges assembly for
  a full interior that is period correct. Check out this full list of standard
  parts and assemblies.
- Exterior Accessories and Lighting: Along with the goodies on
  the inside of the car, the Mk4 complete kit is loaded with the right exterior
  parts and trim on the outside.
  - Authentic Chrome-on-Brass vintage windscreen, tinted with side bars
    and fasteners. DOT safety glass compliant
  - Authentic original style three-lock set including T-trunk handle,
    L-shaped hood handles, matching keys, cam wedges, fasteners, latch pin sleeves
    and plastic end cap
  - Authentic license plate light and bracket with fasteners
  - Authentic 3.5” Aston roller gas cap, polished cast aluminum with
    adaptor kit and all fasteners.
  - Competition hood pins.
  - High quality laser-cut aluminum side louvers.
  - Ceramic F5R badging nose and tail
  - Original style headlamp assemblies, including buckets, halogen
    headlamps, trim rings, and fasteners (DOT approved).
  - Original style British front amber turn signals, and red rear
    tail-lights
  - All lighting is DOT approved.
- Complete Pedal Box and Components: Leaving the Mustang pedal
  box behind, the complete Mk4 kit utilizes the proven Wilwood brand pedal box
  w/fasteners and all the required ancillary parts.
  - Wilwood pedal box and mounting hardware
  - Master Cylinders,(Brake and Clutch) clutch quadrant, clutch cable, threaded firewall
    adjuster
  - Accelerator pedal, accelerator cable, return spring and ball stud
    retainer, w/fasteners
  - Brake line adapters and T-fittings
- Oil Filter Re-locater/Alternate Drive Pulley Assemblies: A
  cool oil filter relocate kit comes with all hoses and hardware. Other parts to
  help 302 EFI and Mustang engine users include…
  - Oil filter relocate mount with fittings, hoses, barbs and
    fasteners
  - Spin-on engine block adapter
  - Alternate drive pulley, spacer, pulley wheel and fasteners
  - Air filter, conical
  - Fan belt, six rib
- 87-95 Mk4 Roadster Assembly Manual: Bound assembly manual
  that is over 200 pages long.
- Fasteners: Over 1500 top quality zinc plated, chrome and
  stainless steel USS and SAE fasteners, numbered and packed individually by
  assembly.

Western Canada Cobras

Canada's Only Authorized Importer of Factory Five Racing Kit Cars

MK4 Complete kit

SITE SECURED BY SITELOCK

Contact Info